Vertical bucket elevator for mining and gravel

1. Max hoisting height: 80m 2. long service life 3. Dust-proof,totaly-enclosed design

Our bucket elevator can elevate powder,  granule and lump material, such as coal, cement, sand, clay and ore.

It also can convey abrasive materials and high temperature materials with the temperature less than 250 degrees.

Feature of bucket elevator

1. Low driving power, inflow feeding, induction unloading, high-volume hopper intensive arrangement. There is almost no feed back and excavating circumstance when materials are lifted, so invalid power is little.

2. Wide lifting range, little materials type and property requirement can not only lift general powder and granule materials, but also lift high polishing materials. Sound seal and little circumstance pollution.

3. Good running reliability, the advanced design principle and handling method assure reliability of whole machine running, the non-fault time exceed 20 thousand hours. Stable running make it reach higher lifting height.

4. The life is long, inflow feeding, non excavating with hopper and there is few extrusion and collision circumstance between materials. There is little materials sprinking during feeding and discharging to reduce machinery abrasion.

Parameters

Model		TH315		TH400		TH500		TH630		TH800		TH1000
Hopper form		Zh	Sh	Zh	Sh	Zh	Sh	Zh	Sh	Zh	Sh	Zh	Sh
transport capacity		35	60	60	94	75	118	114	185	146	235	235	365
hopper	Bucket width(mm)	315		400		500		630		800		1000
	Bucket capacity(L)	3.75	6	5.9	9.5	9.3	15	14.6	23.6	23.3	37.5	37.6	58
	Buckets pitch(mm)	512				688				920
chain	diameter of round steel×pitch(mm)	18×64				22×86				26×92
	Ring numbers	7				7				9
	Branch numbers	2				2				2
Hopper speed(m/s)		1.4				1.5				1.6

Vertical bucket elevator for mining and gravel